If your remote start lights are flashing but the car still won’t start, don’t worry – you’re not alone. This is a common problem that many people experience with their remote start system. In this blog post, we will discuss the reasons why this might be happening and how to fix it. We will also provide an overview of how remote start systems work in cars so that you can better understand what is going on.

Let’s take a look!

What Is Remote Start And How Does It Work?

A remote start system in a car allows you to start your engine without having to physically be in the vehicle. This can be extremely convenient, especially if you live in a cold climate and don’t want to spend time waiting for your car to warm up before you can drive it. Many newer cars come with remote start capabilities built-in, but there are also aftermarket kits that can be installed on older vehicles.

So how does remote start work? In most cases, it uses a key fob that you carry with you. When you press the button on the fob, it sends a signal to the car that tells the engine to start. The car will then run for a pre-determined amount of time, usually around 10 minutes, before shutting off again. Of course, you can always press the button again to restart the engine if you need to.

There are a few different things that can cause your remote start system to stop working properly. Let’s take a look at some of the most common reasons.

Common Reasons Why Remote Start Might Not Work

One of the most common reasons why your remote start might not be working is that the battery in your key fob is dead. If you’re having trouble starting your car with the remote, try pressing the button a few times to see if the light on the key fob comes on. If it doesn’t, then it’s likely that you just need to replace the battery.

Another possibility is that there is something wrong with the receiver in your car that picks up the signal from the key fob. This receiver is usually located near where you insert your key into the ignition. If it’s not working properly, then it won’t be able to pick up the signal from your key fob and start the car.

Also,if you’ve recently had your car’s battery replaced, it’s possible that the new battery is not compatible with your remote start system. If this is the case, you’ll need to take your car to a dealership or a mechanic who can reprogram the system to work with the new battery.

Remote Start Lights Flash But Car Won’t Start?

If your car’s remote starter stops working, it could be for a number of reasons. Here are four common reasons why a remote starter might not work:

1. The remote starter is in valet mode.

Valet mode is a feature on some remote starters that prevents the car from being started without the key fob present. This can be useful if you are leaving your car with a parking attendant or valet. When activated, valet mode will usually disable the remote start function. To activate valet mode, consult your remote starter’s manual.

2. The hood pin has broken or failed.

If you have a remote start feature on your car, then you know the importance of a functioning hood pin. The hood pin is what prevents your car from being started remotely when the hood is up. If the hood pin is broken or fails, then the remote start feature will not work.

There are a few reasons why the hood pin might break or fail. One possibility is that the pin itself is simply worn out and needs to be replaced. Another possibility is that the latch that holds the pin in place is not working properly. This can be due to a variety of reasons, such as rust or wear and tear.

3. The remote control has lost its programming.

If you have a remote start feature on your car, it is important to make sure that the remote control has not lost its programming. Otherwise, you will not be able to use the remote start feature.

There are a few reasons why the remote control might lose its programming. One possibility is that the batteries in the remote control are running low and need to be replaced. Another possibility is that there is something wrong with the antenna or receiver in the car, which prevents the signal from being received properly.

If you find that your remote start feature is not working, it is important to check both the batteries in the remote control and the antenna or receiver in the car. If either of these are not working properly, it will prevent the remote start feature from working

4. Starter Issues

Another possibility is that there’s a problem with the starter. This could be due to a faulty starter motor or solenoid, or it could be a wiring issue. If you suspect the starter is the problem, have it checked by a mechanic.

5. Ignition Issues

If the remote start is flashing but your car won’t start, it could also be an ignition issue. This could be due to a faulty ignition switch or coil, or it could be a problem with the spark plugs. Again, if you suspect an ignition issue, have it checked by a qualified mechanic.

What Should You Do If You Cant Find A Cause?

If you’ve gone through all of the possible causes and you still can’t find a reason why your remote start is flashing but not working, the best thing to do is to take it to a qualified mechanic or dealership. They will be able to diagnose the problem and fix it for you.

In conclusion, if your remote start lights are flashing but your car won’t start, don’t panic! There are a few things you can check yourself, but if you can’t find the cause, it’s best to take it to a qualified professional. With their help, you’ll be back on the road in no time. Thanks for reading!

We hope this post was helpful. If so, please share it with your friends!

Go Home