It’s no secret that rear wiper blades need to be replaced from time to time. But how often should you replace them, and what signs indicate that it’s time for a new blade? In this blog post, we’ll answer those questions and provide a step-by-step guide on how to change the rear wiper blade on your car!

Before we jump into the guide , lets remind ourselves of the basics.

What Is The Purpose Of A Rear Wiper Blade?

A rear wiper blade is a component of the car that is responsible for cleaning the back window. This component helps to improve visibility while driving, which can be crucial in certain situations (such as heavy rain).

Rear wiper blades are not required by law, so it is up to the manufacturer to decide whether or not to include them. However, rear wiper blades are very useful in bad weather conditions and many people consider them essential. Most manufacturers now offer rear wiper blades as standard on their cars.

How Long Do Rear Wiper Blades Typically Last On A Car?

Rear wiper blades are one of those car parts that you don’t really think about until they stop working. And then, you can’t help but wonder how long you’ve been driving around with a streaky rear windshield. So, how long do rear wiper blades typically last?

The answer may surprise you – most rear wiper blades will last for approximately one year with regular use. Of course, there are a few factors that can affect the lifespan of your rear wipers, such as the climate you live in and how often you use them.

If you live in an area with harsh winters, your rear wipers may not last as long as they would in a milder climate. And, if you use your rear wipers frequently (for example, if you have a large dog that likes to ride in the backseat), they may not last as long as those who only use them occasionally.

But, in general, one year is about the average lifespan of a rear wiper blade.

What Are The Signs That You Need New Wiper Blades?

If your car’s rear wiper blades are leaving streaks on the glass or they’re making a chattering noise, it’s time to replace them. Here are a few other signs that it might be time for new wiper blades:

-The rubber looks cracked or frayed.

-It doesn’t clear water as well as it used to.

-There’s rust on the metal parts of the blade.

– They make loud scraping noises while in use

If you notice any of these signs, don’t wait to replace your wiper blades. It will make a big difference in your visibility when driving in bad weather. Don’t take chances with your safety – make sure wipers are up to the task!

Where Can You Buy Replacement Wiper Blades?

Replacement wiper blades can be found at a variety of stores, both online and offline. However, my personal recommendation is to purchase them from Amazon. They have an incredible selection of blades to choose from, and their prices are very competitive.

If you’re looking for a specific brand or type of blade, Amazon likely has it available.

How To Replace A Rear Wiper Blade – Step By Step

Replacing rear wiper blades on a car is a simple process that can be done by anyone. The following guide will walk you through the steps necessary to replace your rear wiper blades.

Materials:

–Rear Wiper Blades

-Screwdriver

-Wrench or Socket Set

Instructions:

Step One: Locate the screws that hold the blade in place. There should be two screws, one at each end of the blade. Use a screwdriver to remove these screws.

Step Two: Remove the old blade by pulling it straight off of the windshield. Be careful not to damage the rubber gasket around the edge of the blade.

Step Three: Install the new blade by aligning it with the screws that were just removed. Be sure to install the new blade so that the rubber gasket is facing outwards and away from the windshield. Secure the blade in place by tightening the screws.

Step Four: Use a wrench or socket set to tighten the nut at the base of the wiper arm. This will secure the wiper in place and keep it from moving around while you are driving.

Step Five: Test your work by using the rear wiper switch to activate the blades. They should move smoothly across the windshield without any noise or jerking motions. If everything looks good, then you’re done! Congratulations on a job well done.

If you have any questions or problems while replacing your rear wiper blades, be sure to consult a mechanic for assistance

Tips For Keeping Your Rear Wiper Blades In Good Condition

The rear wiper blades on a car are just as important as the front ones. Here are a few tips on how to keep your rear wiper blades in good order:

-Clean them regularly. Just like your front wipers, rear wipers should be cleaned on a regular basis. This will help them to function better and last longer.

-Check the blades for wear and tear. Blades that are worn out won’t clean your windows as well as they should, so it’s important to check them regularly and replace them when necessary.

-Make sure the wiper arms are adjusted correctly. If the arms aren’t adjusted correctly, the blades can’t do their job properly. Make sure they’re in the correct position for your car before using them.

Go Home